A central cutout was also present on the trailing edge of the upper flap, with a Gurney also applied (see insets for comparison with regular specs).įerrari’s rear wing for the Italian Grand Prix was simply a 2022 redux, with the team likely happy to save the resources required to develop a bespoke solution.Ī single element beam wing was selected and paired with the low downforce rear wing at the Italian Grand Prix. Mechanics install a larger camera pod on the front wing so that more equipment can be installed to monitor front wing flex.įerrari trialled a single lower beam wing element on the SF-23 at the Hungarian Grand Prix.Ī close up of the rear section of floor on the SF-23 with the floor connecting block for the metal stay now setup as a bridge between the floor and edge wing.įerrari SF-23 rear wing detail, Belgian GPĪ new rear wing design was introduced at the Belgian Grand Prix, as Ferrari presented its version of the open-ended tip section solution that many of their competitors had already raced. The shape of the endplate’s leading edge was altered too (dotted line).Ī look at the leading edge of the floor and floor fences with the floor left detached from the chassis as the car is worked on in the garage.įerrari employed a bi-plane style beam wing arrangement at the British GP, with a slatted upper element set forward of the lower element.Ī look at the power unit before it’s pushed into place behind the chassis. ![]() The revised floor edge on the SF-23 featured an elongated edge wing with an upturned section at the front, while a metal bracket was used to connect the rearmost section of the floor with the edge wing.Ī close up of the SF-23’s chassis without the vanity panel in place allows us to see some of the inboard suspension elements.Ī close up of the SF-23’s wing mirror and the surfaces that wrap around it.Ī close up of the SF-23’s halo and airbox region which is littered with flow adjusting fins and winglets.Ī new front wing design was employed at the Austrian Grand Prix, with the C-shaped cutout in the endplate filled in once more and a small winglet incorporated instead. The leading edge of the Ferrari SF-23’s floor and the floor fences.Ī new sidepod package arrived for the SF-23 at the Spanish Grand Prix, as the team moved away from their bathtub-style solution and adopted something more akin to the downwash ramped solutions many of their rivals were now using. The SF-23’s floor edge had two cutouts to create a separation point in the centre, with the rear portion of the floor both tapering inwards and upwards. Notably a new drill pattern was also favoured to better help control temperatures across a broader range.įerrari’s high downforce rear wing offering for the Monaco Grand Prix featured a single mounting pillar.Ī close up of the chassis duct beneath the main sidepod inlet.Ī close up of the outlet from the chassis duct and the two cooling gill panels within the sidepod’s bathtub. The SF-23’s nose without the vanity panel in place shows how the inner crash structure and outer panels are packaged.įerrari rigged the SF-23 with more sensors in Baku to gather additional data.įerrari SF-23 rear detail with flow-vis paintįlo-viz paint was also used as a means of getting visual confirmation of performance on the rear wing, beam wing, diffuser, etc.Ī comparison of the F1-75 front brake arrangement (left) and the SF-23 (right) shows how the Scuderia opted to move the caliper into the low-slung position, to adopt the disc fairing. ![]() The older specification rear wing with the twin pillar arrangement.įerrari SF-23 front wing end plate detailįerrari took a nibble out of its front wing endplate as part of an update for the Saudi Arabian Grand Prix, with the C-shaped cutout in the lower corner likely targeting an improved outwash effect.Ī close up of the slot gap separator brackets installed on the SF-23’s front wing, which offer more aerodynamic support than the regular horseshoe-style brackets would.Īnother angle showing the slot gap separator brackets and how they might infer more outwash. ![]() ![]() The SF-23’s chassis dips down to allow the lower wishbone to be positioned lower.įerrari introduced a new rear wing at the Saudi Arabian Grand Prix, which featured a single central support pillar, rather than the twin pillar arrangement. Photo by: Mark Sutton / Motorsport ImagesĬarlos Sainz, Ferrari SF-23, rear wing detail The SF-23 without some of the lower chassis bodywork in place allows us to see the internal bib structure and the sprung stay that connects it to the underside of the chassis. The SF-23 had an interesting feature that was unique to Ferrari and allowed airflow captured below the inlet to escape into the upper surface of the sidepod.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |